When applied to surfaces, SALT-X finds its way into each crack and crevice, deactivating and encapsulating salt crystals, thereby halting the corrosion reaction so that the salt is no longer active and damaging. Additionally, the formula contains a corrosion inhibitor compound to further protect surfaces. Left to air dry on surfaces, SALT-X forms a protective coating against salt damage.
An excellent example of SALT-X at work is in marine engine cooling system flushes. Once marine engines are powered off, salt remains and builds up in the cooling system. When SALT-X is used as a flush, it travels through the galleries of the engine, destroying this salt build-up.
Not just for marine use though - SALT-X can be safely applied to any part of your car, truck, ATV, snow or seasonal outdoor-related equipment, without leaving any white residue. It is water soluble, non-oil based and environmentally safe. Used regularly, it lengthens the life of your valuable assets while also ensuring performance is not sabotaged by corrosive salt build-up.
Repeated use of SALT-X in the field by retail, commercial, industrial and military customers have shown that, when used regularly as part of a daily and or weekly Scheduled Preventive Maintenance program, SALT-X removes even the harshest build-up of salt and salt film from all types of surfaces, without harming paints, oils, greases, fabrics, rubber items, plastics etc. thereby adding years to the useful life of the equipment.
Protect your investments with Salt-X.
DIRECTIONS FOR USE:
SALT-X is a concentrated rinsing and/or flushing agent designed exclusively for the removal of salt residue and crystals from virtually any surface! As Aggressive as SALT-X is in removing even the harshest build up, laboratory tests have proven SALT-X to be NON TOXIC and ENVIRONMENTALLY SAFE. And it is very easy to use:
- For personal and general marine usage – spray SALT-X and let dry
- For industrial usage and/or more significant grime or snow build-up:
- Wash or pressure wash the surface (depending on amount of build-up)
- Then mix 2 oz. of SALT-X per gallon of water
- Spray the entire surface thoroughly
- Leave to air dry
NO rubbing, scrubbing or further rinsing required!
The protection and economic benefits of SALT-X, make it a MUST for anyone in a salt environment.
Wherever salt is a problem – Salt-X is the solution..
Saltbuster was designed to take advantage of the SALT-X technology by combining a general purpose detergent with SALT-X. The result was an industrial cleaner / wash that not only removes mild to medium soils, grease, oil and hydrocarbons but also removes even the harshest of salt buildup!
Fresh water (which contains chlorine) and ordinary soaps (which for the most part contain salt as a building agent) will not remove stubborn salt film from surfaces. This film is the first stage of corrosion! Saltbuster works quickly to deactivate, dissolve and remove this film, thus extending the usable life of any surface exposed to salt. A unique corrosion inhibitor in Saltbuster actually leaves a dry non-oily coating to help protect temporarily against further salt exposure. Repeated use in the field by retail, industrial and military customers have shown that when used regularly as part of a daily or weekly Preventive Maintenance program, SALT-X Pro Clean can also add years to the useful life of equipment.
DIRECTIONS FOR USE:
Mix 236 ml (8 ounces) Saltbuster per gallon of water. Wet surface liberally, let sit for 5 minutes, scrub if necessary and rinse with fresh water. Saltbuster should be applied by hand, mop, sponge, brush or a foam air gun. For maximum results, use Saltbuster each time equipment is exposed to salt and salt water or on a regular basis if used aboard ship.
For removing Salt Residue from Commercial Flooring, Boat & Ship decks:
- Sweep the floor of any granulated salt and other debris
- Mix Saltbuster in your mop bucket or floor scrubber.
- Apply the solution to the floor or boat deck and let it sit for 5 minutes.
- Pick up the solution with mop, wet/dry vacuum or floor scrubber.
- Repeat Steps 1-4 if there is still salt residue on the floor.
CAUTION: KEEP OUT OF REACH OF CHILDREN. Product may cause eye irritation. In case of contact with skin, rinse off. In case of contact with eyes, flush eyes with water for at least 15 minutes. If irritation persists, get medical attention. Do not use more than 8 ounces of Saltbusterper gallon of water.